Huba Control Heat sink

Heat sink



As a result of the heat sink it is possible to use medium with higher temperature. The cooling section reduces the temperature of the hot media. Depending on the ambient temperature the use of medium with temperature of more than 200°C without harming the transmitter is possible. Different standardised pressure connections allow the combination with the pressure measurement systems of Huba Control.

Medium 

Liquids and gases

Material 

Stainless steel 1.4305 / AISI 303

Media duct 

Ø 4mm

WeightApprox. 325g

Favourable solution for high media temperatures

Easy mounting

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Digital Indicating Device 801

Digital Indicating Device 801
LCD Module


Type 801 digital indicators are compatible with all sensors with DIN plug EN 175301-803-A.  Independent of the mounting position of the sensor, the display can be rotated to give the ideal reading position. The 801 has a 3 digit liquid-crystal display which is adjustable by the customer, or available factory set.




Input signals 0 ... 5 V
                                                  0 ... 10 V
                                                  0 ... 20 mA

                                                  4 ... 20 mA

Portable plug-in indicator

Irrespective of the installation arrangement of your transducer the display module can be rotated and turned to give the ideal reading-position

Protection class IP 65 with screw fastened DIN EN 175301-803 connectors

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.

Huba Control Digital Indicating Device 800

Digital Indicating Device 800
mbar / bar with 2 limit values

Type 800 digital indicators are equipped with a 4 digit display, as well as optional switch and analogue outputs. The sensor signal is evaluated and indicated as pressure by the digital display. The programming of the limit value output can be executed with the buttons on the front or via a data cable from a computer.

Input signals 

0 ... 5 V, 0 ... 10 V,

0 ... 20 mA, 4 ... 20 mA

Output signals0 ... 10 V,
0 ... 20 mA, 4 ... 20 mA
Potential-free limit value switch

Accessories

Protection cover

800.100

Data cable

 800.200

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Force cell 410

Force cell 410
40 to 265 Centi-Newton

The type 410 measures force with the cantilever beam by an integrated piezo-resistive wheatstone bridge with front-end amplification circuit. It uses hybrid thick film technology which guarantees an excellent stability and a long operating life. The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities. Fixed order quantities on request

Measuring range 

0 ... 53 – 265 Centi-Newton

Output 

0.3 ... 2.8 V

Electrical connection 

PIN connection, RAST 2.5

CompensationWith temperature compensated

Compact construction for a wide range of industrial applications

Ideal for OEM batches in high quantities

High resistance to extreme temperatures

No mechanical aging

No mechanical creepage

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 513 - barometric sensor

Pressure measuring cell OEM 513 - barometric sensor
0.8 ... 1.4 bar


This pressure measuring cell, barometric adjusted with protection case is suitable for plug mounting on PCB. The output signal is linear, temperature compensated and amplified. The robust construction guarantees a long term stable measuring result. Fixed order quantities on request

Medium 

Air and neutral gases

Pressure range 

0.8 ... 1.4 bar

Output 

ratiom. 10 ... 90%

Accuracy 

< 0.3 % FS

Electrical connectionConnector RAST 1.27 mm

Integrated amplifier electronics

No customer specific adjustment necessary

Excellent EMC capacity by reinforcement on measuring cell

Easy and quick fitting

Plastic case for direct mounting

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 513

OEM Pressure measuring cell 513
-1 ... 0 - 600 bar

Type 513 pressure measuring cells have an adjusted, amplified sensor signal. They are especially suitable for high quantities in OEM applications. The unique integrated electronics allow installation without the need for temperature and pressure adjustment by the customer. Fixed order quantities on request

Medium Liquids and gases

Pressure range -1 ... 0 – 600 bar

Output ratiom. 10 ... 90%, ratiom. 10 ... 60% ± 1.2 V

Accuracy < 0.3% FS

Electrical connectionFlexible connector RAST 2.54 mm,
connector RAST 1.27 mm

Integrated amplifier electronics

No customer specific adjustment necessary

Excellent EMC capacity by reinforcement on measuring cell

Easy and quick fitting

Negligible temperature influence on accuracy

Accessories

O-Ring FPM -15 ... +125 ºC

105598

O-Ring NBR -25 ... + 85 ºC

105145

O-Ring FPM -30 ... +150 ºC

109338

O-Ring FPM -15 ... +125 ºC

 105285

O-Ring NBR -25 ... + 85 ºC

 104952

O-Ring FPM -30 ... +150 ºC

102321

Stützring Teflon -30 ... +150 ºC

 114660

Positioning ring (PPS)

 107397

Positioning ring without cam (PPS)

 107926

Positioning ring (metal)

 107383

Connection print (connector couterpart)

109225

Clam screw M20x1

 112151

Screw insert for clamp screw

 112187

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 509

Pressure measuring cell 509
0 ... 2.5 - 250 bar


Type 509 pressure measuring cells are based on ceramic technology developed by Huba Control, and used for the last 20 years in millions of applications. Due to the robust design of the ceramic cell there are no significant changes in the sensor characteristics when mounted by the customer. The pressure measuring cells are delivered either factory set or with TK zero point adjustment. You can choose between various versions as integrated temperature measurement. Fixed order quantities on request

Medium Liquids and gases

Pressure range 0 ... 2.5 – 250 bar

Nullpunkt 0.2 ± 0.2 mV / V

Spannung bei Nenndruck 2.5 ± 1.5 mV / V

Accuracy < 0.5% FS

Electrical connection Flexible connector RAST 2.54 mm,
bondpads (AgPd) RAST 1.27 mm,
pin-Conector

Negligible temperature influence on accuracy

No customer specific adjustment of zero point and temperature compensation necessary

Easy mounting

Overload secure up to rupture pressure

Accessories

O-Ring FPM -15 ... +125 ºC

105598

O-Ring NBR -25 ... + 85 ºC

105145

O-Ring FPM -30 ... +150 ºC

109338

O-Ring FPM -15 ... +125 ºC

105285

O-Ring NBR -25 ... + 85 ºC

104952

O-Ring FPM -30 ... +150 ºC

102321

Stützring Teflon -30 ... +150 ºC

114660

Clam screw M20x1

112151

Screw insert for clamp screw

112187

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.