0 ... 2.5 - 250 bar
Type 509 pressure measuring cells are based on ceramic technology developed by Huba Control, and used for the last 20 years in millions of applications. Due to the robust design of the ceramic cell there are no significant changes in the sensor characteristics when mounted by the customer. The pressure measuring cells are delivered either factory set or with TK zero point adjustment. You can choose between various versions as integrated temperature measurement. Fixed order quantities on request
Medium Liquids and gases
Pressure range 0 ... 2.5 – 250 bar
Nullpunkt 0.2 ± 0.2 mV / V
Spannung bei Nenndruck 2.5 ± 1.5 mV / V
Accuracy < 0.5% FS
Electrical connection Flexible connector RAST 2.54 mm,
bondpads (AgPd) RAST 1.27 mm,
pin-Conector
bondpads (AgPd) RAST 1.27 mm,
pin-Conector
Negligible temperature influence on accuracy
No customer specific adjustment of zero point and temperature compensation necessary
Easy mounting
Overload secure up to rupture pressure
Accessories
O-Ring FPM -15 ... +125 ºC
105598
O-Ring NBR -25 ... + 85 ºC
105145
O-Ring FPM -30 ... +150 ºC
109338
O-Ring FPM -15 ... +125 ºC
105285
O-Ring NBR -25 ... + 85 ºC
104952
O-Ring FPM -30 ... +150 ºC
102321
Stützring Teflon -30 ... +150 ºC
114660
Clam screw M20x1
112151
Screw insert for clamp screw
112187
Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514
TECH IMPRO AUTOMATION SOLUTION SDN. BHD.
Address: 7263 (1st Floor), Lorong Chempa,
12200 Butterworth,
Penang, Malaysia.
Penang, Malaysia.
No comments:
Post a Comment