Huba Control Heat sink

Heat sink



As a result of the heat sink it is possible to use medium with higher temperature. The cooling section reduces the temperature of the hot media. Depending on the ambient temperature the use of medium with temperature of more than 200°C without harming the transmitter is possible. Different standardised pressure connections allow the combination with the pressure measurement systems of Huba Control.

Medium 

Liquids and gases

Material 

Stainless steel 1.4305 / AISI 303

Media duct 

Ø 4mm

WeightApprox. 325g

Favourable solution for high media temperatures

Easy mounting

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Digital Indicating Device 801

Digital Indicating Device 801
LCD Module


Type 801 digital indicators are compatible with all sensors with DIN plug EN 175301-803-A.  Independent of the mounting position of the sensor, the display can be rotated to give the ideal reading position. The 801 has a 3 digit liquid-crystal display which is adjustable by the customer, or available factory set.




Input signals 0 ... 5 V
                                                  0 ... 10 V
                                                  0 ... 20 mA

                                                  4 ... 20 mA

Portable plug-in indicator

Irrespective of the installation arrangement of your transducer the display module can be rotated and turned to give the ideal reading-position

Protection class IP 65 with screw fastened DIN EN 175301-803 connectors

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.

Huba Control Digital Indicating Device 800

Digital Indicating Device 800
mbar / bar with 2 limit values

Type 800 digital indicators are equipped with a 4 digit display, as well as optional switch and analogue outputs. The sensor signal is evaluated and indicated as pressure by the digital display. The programming of the limit value output can be executed with the buttons on the front or via a data cable from a computer.

Input signals 

0 ... 5 V, 0 ... 10 V,

0 ... 20 mA, 4 ... 20 mA

Output signals0 ... 10 V,
0 ... 20 mA, 4 ... 20 mA
Potential-free limit value switch

Accessories

Protection cover

800.100

Data cable

 800.200

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Force cell 410

Force cell 410
40 to 265 Centi-Newton

The type 410 measures force with the cantilever beam by an integrated piezo-resistive wheatstone bridge with front-end amplification circuit. It uses hybrid thick film technology which guarantees an excellent stability and a long operating life. The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities. Fixed order quantities on request

Measuring range 

0 ... 53 – 265 Centi-Newton

Output 

0.3 ... 2.8 V

Electrical connection 

PIN connection, RAST 2.5

CompensationWith temperature compensated

Compact construction for a wide range of industrial applications

Ideal for OEM batches in high quantities

High resistance to extreme temperatures

No mechanical aging

No mechanical creepage

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 513 - barometric sensor

Pressure measuring cell OEM 513 - barometric sensor
0.8 ... 1.4 bar


This pressure measuring cell, barometric adjusted with protection case is suitable for plug mounting on PCB. The output signal is linear, temperature compensated and amplified. The robust construction guarantees a long term stable measuring result. Fixed order quantities on request

Medium 

Air and neutral gases

Pressure range 

0.8 ... 1.4 bar

Output 

ratiom. 10 ... 90%

Accuracy 

< 0.3 % FS

Electrical connectionConnector RAST 1.27 mm

Integrated amplifier electronics

No customer specific adjustment necessary

Excellent EMC capacity by reinforcement on measuring cell

Easy and quick fitting

Plastic case for direct mounting

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 513

OEM Pressure measuring cell 513
-1 ... 0 - 600 bar

Type 513 pressure measuring cells have an adjusted, amplified sensor signal. They are especially suitable for high quantities in OEM applications. The unique integrated electronics allow installation without the need for temperature and pressure adjustment by the customer. Fixed order quantities on request

Medium Liquids and gases

Pressure range -1 ... 0 – 600 bar

Output ratiom. 10 ... 90%, ratiom. 10 ... 60% ± 1.2 V

Accuracy < 0.3% FS

Electrical connectionFlexible connector RAST 2.54 mm,
connector RAST 1.27 mm

Integrated amplifier electronics

No customer specific adjustment necessary

Excellent EMC capacity by reinforcement on measuring cell

Easy and quick fitting

Negligible temperature influence on accuracy

Accessories

O-Ring FPM -15 ... +125 ºC

105598

O-Ring NBR -25 ... + 85 ºC

105145

O-Ring FPM -30 ... +150 ºC

109338

O-Ring FPM -15 ... +125 ºC

 105285

O-Ring NBR -25 ... + 85 ºC

 104952

O-Ring FPM -30 ... +150 ºC

102321

Stützring Teflon -30 ... +150 ºC

 114660

Positioning ring (PPS)

 107397

Positioning ring without cam (PPS)

 107926

Positioning ring (metal)

 107383

Connection print (connector couterpart)

109225

Clam screw M20x1

 112151

Screw insert for clamp screw

 112187

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure measuring cell 509

Pressure measuring cell 509
0 ... 2.5 - 250 bar


Type 509 pressure measuring cells are based on ceramic technology developed by Huba Control, and used for the last 20 years in millions of applications. Due to the robust design of the ceramic cell there are no significant changes in the sensor characteristics when mounted by the customer. The pressure measuring cells are delivered either factory set or with TK zero point adjustment. You can choose between various versions as integrated temperature measurement. Fixed order quantities on request

Medium Liquids and gases

Pressure range 0 ... 2.5 – 250 bar

Nullpunkt 0.2 ± 0.2 mV / V

Spannung bei Nenndruck 2.5 ± 1.5 mV / V

Accuracy < 0.5% FS

Electrical connection Flexible connector RAST 2.54 mm,
bondpads (AgPd) RAST 1.27 mm,
pin-Conector

Negligible temperature influence on accuracy

No customer specific adjustment of zero point and temperature compensation necessary

Easy mounting

Overload secure up to rupture pressure

Accessories

O-Ring FPM -15 ... +125 ºC

105598

O-Ring NBR -25 ... + 85 ºC

105145

O-Ring FPM -30 ... +150 ºC

109338

O-Ring FPM -15 ... +125 ºC

105285

O-Ring NBR -25 ... + 85 ºC

104952

O-Ring FPM -30 ... +150 ºC

102321

Stützring Teflon -30 ... +150 ºC

114660

Clam screw M20x1

112151

Screw insert for clamp screw

112187

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Vortex flow sensor 236

Flow sensor 236
0.9 ... 240 l/min

The difference between flow sensor type 236 and type 210 is the version of the case. The Vortex sensor type 236 has a rugged construction of brass connection. This flow sensor is available with a larger variety concerning power supply and outputs. You can choose between various versions as integrated temperature measurement. Type 236 without moving parts is insensitive to pollution and persuades by very few loss of pressure and a very high accuracy.

Medium 

Fluides

Flow range 

1.8 ... 240 l/min.

Nominal diameters 

DN 10 / 15 / 20 / 25 / 32

Output 

Frequency output 9 ... 479 Hz

Analogue signal 0 ... 10 V, 4 ... 20 mA

Temp. measurment 

PT1000

Electrical connection 

M12x1

Tube connection Brass - outside threa

Flow measuring with voltage, current, pulse or frequency output

Temperature non-sensitive measuring principle

Excellent media resistance (measuring element not in contact with the media)

Available with temperature measurement

Excellent EMC capacity by reinforcement on measuring cell

Measuring element not sensitive to debris

Direct temperature measurement in the medium

Drinking water approval

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Vortex flow sensor 235

OEM Flow sensor 235
0.9 ... 240 l/min

The difference between flow sensor type 235 and type 200 is the version of the case. The flow sensor type 235 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Medium 

Fluides

Flow range 

0.9 ... 240 l/min.

Nominal diameters 

DN 10 / 15 / 20 / 25 / 32

Output 

Frequency output 9 ... 479 Hz

Temp. measurment 

NTC / PT1000

Electrical connection 

Connector RAST 2.5, M12x1

Tube connectionBrass - outside thread

Low cost product with high levels of accuracy

Temperature non-sensitive measuring principle

Excellent media resistance (measuring element not in contact with the media)

Wide application temperature range

Marginal loss of pressure

Measuring element not sensitive to debris

Direct temperature measurement in the medium with PT1000 or NTC

Drinking water approval

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Vortex flow sensor 230

Flow sensor 230
1.8 ... 150 l/min


The flow sensor type 230 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement.  The type 230 has a rugged construction of red brass. With no moving parts the flow sensor is not sensitive to debris, has marginal pressure loss and high accuracy.

Medium Fluides

Flow range 1.8 ... 150 l/min.

Nominal diameters DN 10 / 15 / 20 / 25

Output Frequency output 13 ... 480 Hz
                                                  Analogue signal 0 ... 10 V, 4 ... 20 mAA

Temp. measurment PT1000

Electrical connection M12x1

Tube connectionRed brass - outside thread

Flow measuring with voltage, current, pulse or frequency output

Excellent media resistance (measuring element not in contact with the media)

Available with integrated temperature measurement

Temperature non-sensitive measuring principle

Wide application temperature range

Marginal loss of pressure

Measuring element not sensitive to debris

Drinking water approval

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Vortex flow sensor 212

Flow sensor 212 with display
0.5 ... 150 l/min



The flow sensor type 212 is based on the Kármán vortex trail. Vortex trail principle. This flow sensor convinces due to the additional digital indicating device which shows the flow rate and the media temperature. The type 212 is available with and without temperature measurement.

With no moving parts the flow sensor is not sensitive to debris, has marginal pressure loss and high accuracy.

Medium Fluides

Flow range 0.5 ... 150 l/min.

Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25

Output 4 ... 14.5 mA, 4 ... 20 mA

Electrical connection M12x1

Tube connectionPlastic - connection copper tube
Plastic - outside thread


Flow measuring with immediate display of flow measuring range and medium temperature

Excellent media resistance (measuring element not in contact with the media)

Available with integrated temperature measurement

CE conformityMarginal loss of pressure

Measuring element not sensitive to debris

Drinking water approval

Temperature non-sensitive measuring principle

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.