Huba Control Vortex flow sensor 210

Flow sensor 210
0.5 ... 150 l/min

In comparison to the OEM flow sensor (type 200) the type 210 is available with a larger variety concerning power supply and outputs. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is  insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Medium Fluides

Flow range 0.5 ... 150 l/min.

Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25

Output Frequency output 12 ... 483 Hz
                                                  Analogue signal 0 ... 10 V, 4 ... 20 mA

Temp. measurment PT1000, 0 ... 10 V

Electrical connection M12x1

Tube connectionPlastic - connection copper tube
Plastic - outside thread



Flow measuring with voltage, current, pulse or frequency output

Excellent media resistance (measuring element not in contact with the media)

Available with integrated temperature measurement

Temperature non-sensitive measuring principle

Wide application temperature range

Marginal loss of pressure

Measuring element not sensitive to debris

Drinking water approval

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Vortex flow sensor 200

OEM Flow sensor 200
0.5 ... 150 l/min

The vortex flow sensor type 200 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and persuade by very few loss of pressure and a very high accuracy.

Fixed order quantities on request

Medium Fluides

Flow range 0.5 ... 150 l/min.

Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25

Output Frequency output 12 ... 483 Hz

Temp. measurment NTC / PT1000

Electrical connection Connector RAST 2.5, M12x1

Tube connectionPlastic - connection copper tube
Plastic - outside thread



Low cost product with high levels of accuracy

Temperature non-sensitive measuring principle

Excellent media resistance (measuring element not in contact with the media)

Marginal loss of pressure

Measuring element not sensitive to debris

Direct temperature measurement in the medium with PT1000 or NTC

Wide application temperature range

Drinking water approval

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure level transmitter 713

Pressure level transmitter 713
0 ... 0.6 - 16 bar

The pressure level transmitter type 713 is used for continuous fluid level measurement of ground and drinking water. The compact design allows the transmitter to be used in applications with restricted access as small as 3/4 inch i.d. pipe. 
As well as a current output the pressure level transmitter type 713 has been enhanced with energy efficient ratiometric and digital outputs making it ideal for battery powered applications.
The pressure level sensor 713 is based upon the well proven ceramic technology developed by Huba Control over 20 years ago.

Medium Fluides

Pressure range 0 ... 0.6 - 16 bar

Output 4 ... 20 mA , ratiom. 10 ... 90%,3000 ... 11000 Digits

Accuracy < 0.3% fs

Electrical connectionCable in several lengths

Ceramic sensor Al2O3 99.6%

Continuous level measurement

Suitable for drinking water

Available with temperature measurement

Excellent linearity and long term stability

Applicable in 3/4 inch pipes

Accessories

Cable hanger

 118026

Connection box

 118027

Humidity protection element (pack of 10)

 118068

Calibration certificate

 104551

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure level transmitter 712


Pressure level transmitter 712
0 ... 0.3 - 3 bar

The level sensing pressure transmitter Type 712 is manufactured using a relative and absolute pressure measuring cell with an adjusted and amplified sensor signal and is available with various cable lengths from 2 to 30 meters. The Type 712 offers EX protection as well as versions with integrated temperature measurement.  

In addition to voltage and current outputs the Type 712 is available with ratiometric outputs.

Medium Fluides

Pressure range 0 ... 0.3 – 3 bar

Output 0 ... 10 V, 4 ... 20 mA , ratiom. 10 ... 90%

Accuracy < 0.3% FS

Electrical connectionCable in several lengths

Suitable for drinking water

Intrinsically safe execution with voltage and current output with integrated temperature measurement

Suitable for fitting in 1-inch pipe

Accessories

Cable hanger

118026

Connection box

118027

Test adapter

118028

Protection cover

118067

Humidity protection element (pack of 10)

118068

Additional weight

118093

Calibration certificate

 104551

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure level transmitter 711

Pressure level transmitter 711
0 ... 0.1 - 16 bar


The level sensing pressure transmitters of type 711 with a relative pressure measuring cell have an adjusted and amplified sensor signal. Cable length from 3 to 300 meters as well as ex-versions and versions with drinking water approval are available

Medium Fluides

Pressure range 0 ... 0.1 - 16 bar

Output 4 ... 20 mA

Accuracy < 0.3% fs

Electrical connectionCable in several lengths

Ex-version availabe

High accuracy

Large variety of cable length (3 to 300 m)

Low pressure ranges

Sea water resistant

Accessories

Cable hanger

118835

Connection box

118836

Protection cage (stainless steel 1.4404 / AISI 316L)

 118837

Protection cage (stainless steel 1.4539 / AISI 904L)

119688

Protection cover PPE for PE cable (pack of 10)

118838

Protection cover ETFE for FEP cable (pack of 10)

 118839

Humidity protection element (pack of 10)

119217

Calibration certificate

 104551

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia. 

Huba Control Pressure level transmitter 681

Pressure level transmitter 681
0 ... 0.1 - 25 bar



The level sensing transmitter of type 681 with piezoresistive measuring elements have compensated, adjusted and amplified sensor signals which are available as standard voltage or current outputs. In the immersion-sensor version with a salt water and oil-resistant connection cable they are specially suited for level measurement, even in the presence of corrosive liquids. 
The cable incorporates a tube for compensation of the ambient pressure. 
Manufactured from stainless steel, its welded construction provides a watertight seal.

Medium Fluides, aggressive fluides, potable water

Pressure range 0 ... 0.1 – 25 bar

Output 0 ... 5 V, 0 ... 10 V, 4 ... 20 mA

Accuracy < 0.25% fs (< 0.05% fs on request)

Electrical connectionCable in several lengths

Mechanically protected diaphragm due to special head design

Effective overload protection due to chemically etched chip diaphragm and specially designed glass gland

Compact construction using SMD technology, enhances operational reliability in the presence of shock and vibration

Supplementary weight (option) improves stabilization of sensor in turbulent media

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.

Huba Control Mechanical Pressure Switch 630

Mechanical Pressure Switch 630
6 ... 5500 mbar

Differential pressure, vacuum and overpressure switches of type 630 are suitable for monitoring neutral and slightly aggressive liquids and gases. Switching element isolated from medium. Ideal for use as flow monitor in sanitary piping/ heating installations or for level monitoring in  general in process technology applications. Extremely rugged construction with high functionality due to 10/20 bar safety margin in both pressure chambres.

Medium Liquids and neutral gases

Druckbereich 6 ... 5500 mbar

Pressure range Screw terminals, Tab connectors 6.3 mm

Pressure connectionInside thread

Mounting bracket

Contact: ken.sim@improtechonline.com
Mr.Ken Sim, Mobile: +6012-4661514

TECH IMPRO AUTOMATION SOLUTION SDN. BHD.

Address: 7263 (1st Floor), Lorong Chempa,

12200 Butterworth,
Penang, Malaysia.